Confirm the cabinet configuration first

An outdoor power supply order should begin with the equipment and battery arrangement. Our Outdoor integrated temperature control cabinet is used for wireless communication base stations, 5G systems, communication networks, access or transmission switching base stations, emergency communications, and related power or battery equipment.

The comprehensive cabinet contains two equipment compartments and one battery compartment. The equipment cabinet is a separate enclosure for standard 19-inch equipment, while the battery cabinet is designed for mounting batteries. Ask us to confirm the selected configuration against your equipment list before releasing the order.

The reference dimensions are 650 × 650 × 1400 mm, with customizable dimensions. Measure the installation pad, doorway, access route, lifting path, and service area against the proposed drawing. A cabinet may fit the equipment while still creating a delivery problem if it cannot pass through the site entrance. Include these measurements in the quotation request.

Inspect materials, finish, protection, and load

The cabinet uses hot-dip galvanized steel, cold plate steel, and color steel insulation board. During sample inspection, compare the material schedule with the quotation and drawing. Check panel joints, door fit, corners, mounting points, base areas, and any surfaces that may be exposed to moisture or handling damage.

The surface treatment includes rust removal, antirust phosphating or galvanizing, and PANTONE 428C spraying. Ask us to identify the agreed treatment sequence and color reference in the order file. Inspect the sample for continuous coating, clean edges, secure hardware, and damage-free surfaces. Photograph the exterior, interior, grounding bar, exhaust opening, and rack mounting points for the inspection record.

The cabinet load is at least 500 kg, and the body protection level is IP55. Compare the planned equipment and battery weight with the cabinet load requirement, including weight distribution. Ask the supplier to identify load-bearing parts and to confirm how the IP55 protection arrangement applies to doors, seams, cable routes, and exhaust openings.

The insulation resistance between the grounding bar and metal workpieces is less than 0.1 Ω. Check that the grounding bar is accessible, bonding points are identified, and the inspection record uses the same configuration and test points as the ordered cabinet.

Review thermal and gas management

The door panel is covered with thermal insulation cotton, and the cabinet has an exhaust device for releasing harmful gases produced by the battery. These features should appear on the cabinet drawing because they affect the door construction, battery compartment, exhaust route, and installation clearance.

During sample review, confirm that the insulation is fitted to the specified door panels without obstructing closing, seals, rack space, or cable routing. Trace the exhaust route from the battery compartment to the outlet. Ask for the exhaust device location, power requirement when applicable, outlet orientation, and required clearance in the quotation response.

Picture a communication site where technicians access the equipment compartment while batteries remain in their dedicated zone. Check which door, rack position, and cable route serve each function. Measure the service area around the cabinet and confirm that the exhaust outlet will not face an obstruction or an intake.

Set a practical sampling and acceptance plan

Request a sample, pre-production unit, or inspection point that represents the final size, materials, surface treatment, compartment layout, and customized features. Compare it with the approved drawing using a written checklist.

The inspection should cover external dimensions, door operation, panel alignment, 19-inch mounting points, battery compartment space, insulation cotton, exhaust device, grounding bar, surface finish, and labels. Record deviations with photographs and obtain written disposition before bulk production continues.

For a customized cabinet, place the approved drawing, material schedule, finish, protection level, load requirement, and electrical inspection method in the purchase file. Ask how samples are handled, whether a sample charge applies, who pays shipping, which inspection stage is available, and how sample changes are controlled.

Ask about packaging and shipping

Packaging should protect painted panels, doors, rack fittings, grounding parts, and exhaust components from impact, moisture, and movement. Request the proposed packing method, package dimensions, gross and net weight, lifting points, stacking limits, moisture protection, and packing list.

Confirm whether loose accessories are packed inside the cabinet, separately, or attached to the package. Before shipment, match each cabinet label with the purchase order and approved configuration. For a multi-unit order, ask how customized cabinets are numbered and distinguished.

The packing list should identify cabinet quantity, accessories, package count, dimensions, weights, and shipping marks needed for receiving and installation. This information also helps you plan unloading equipment and storage space at the destination.

Clarify quantity and timing in the quotation

Request the supplier's MOQ, production capacity for your configuration, production lead time, inspection timing, shipment readiness date, shipping term, and payment terms in the quotation. Ask whether customized dimensions or surface treatment change the MOQ or lead time.

Build the request around the quantity required for the site, any spare units, destination, and target installation date. A bulk order may contain several cabinet configurations, so ask the supplier to identify whether the MOQ and production schedule apply per model, per configuration, or to the complete order.

We should confirm the schedule against the actual cabinet arrangement before you commit to installation work, freight bookings, or downstream equipment delivery.

Evaluate the supplier through the order file

Compare suppliers on how clearly they connect the technical drawing, parameters, sample, inspection method, packing plan, and quotation. The supplier response should identify the exact cabinet configuration and show how customized requirements are controlled.

Request a general arrangement drawing showing the reference or custom dimensions, compartment layout, 19-inch mounting positions, doors, exhaust route, grounding bar, lifting points, and cable openings. Request the material and surface-treatment specification, IP55 inspection or test record, flame-retardancy test report for the GB5169.7 test A requirement, insulation-resistance test record, final inspection report, and packing list.

For a customized cabinet, also request a sample approval record and revision or change-control record. Compare the supplier's documents with the unit inspected during sampling. A mismatch between the drawing, test record, label, and delivered cabinet should be resolved before acceptance.

We supply this cabinet for outdoor communications and battery or power equipment applications. Site fit and order configuration should be settled before production. Send the equipment list, battery arrangement, site dimensions, required quantity, destination, target date, and requested documents with your inquiry so we can return a comparable quotation.

Questions to settle before release

Send a configuration-ready inquiry

Our Outdoor integrated temperature control cabinet fits projects that need separated battery and equipment zones, 19-inch installation, outdoor body protection, thermal insulation, and battery-gas exhaust. Prepare the equipment list, battery dimensions and weights, site access measurements, custom size, quantity, destination, target date, packing needs, and requested inspection documents before asking for the quotation.